Common faults and solutions for conveyor accessories

There are many types of conveyor accessories, but the main problems are as follows

1. The motor cannot start, or it slowly stalls after starting.

Handling method: 

a. Check the voltage and the circuit on the conveying equipment;

b. Check the overloaded electrical appliances;

c. Reduce the number of operations of the conveying equipment if necessary;

2. The motor is hot and scalding

Handling method: a. Clear the dust around the motor;

b. Measure the motor power and check the cause of the overload;

c. Add lubricating oil to the transmission parts of the conveying equipment;

3. The reducer is overheated

Handling method: 

a. The amount of oil in the machine should be injected according to the specified requirements;

b. Clean the inside regularly, and change the oil or replace the bearings in time;

4. The conveyor belt is running off the track and slipping

Handling method: 

a. Adjust the frame or roller to ensure Keep it straight;

b. Adjust the rollers and correct the conveyor belt;

c. Ensure that the joint is perpendicular to the center of the conveyor belt;

d. Adjust the position of the coal drop point;

5. Aging and tearing of the conveyor belt

Handling method: 

a. The conveyor belt must be kept in accordance with the manufacturer's requirements;

b. Ask professionals to replace it in time, and pay attention to prevent the belt from hanging on the fixed components or falling into the metal components;

c. Try to avoid short-distance laying and use

6. Conveying network breaks

Handling method: 

a. Replace the aging and torn conveyor belt in time

b. Select materials with stable physical properties, pay attention to waterproofing and cold-proofing

c. The joint department should check regularly.